Composition of panel saw

panel saw includes the bed, worktable, longitudinal section and transverse section guide plate, main saw, scribing saw, transmission and other components. The structure and working principle are similar to those of ordinary circular saw machines, and can be used alone as ordinary circular saw machines. Composition of

panel saw:

1. Frame; 2. Main saw part; 3. Slot saw part; 4. Transverse guide baffle; 5. Fixed worktable; 6. Sliding push table; 7. Mill saw guide plate; 8. Bracket; 9. Mill saw angle display device; 10. Lateral guide baffle.

The main structural feature of the

push table saw is the use of two saw blades, namely the main saw blade and the scribing saw blade. When cutting processing, the scribing saw is sawed in advance, and a groove with a depth of 1~2mm and a width of 0.1~0.2mm thicker than the main saw blade is sawed on the bottom surface of the processed plate, so as to ensure that the edge of the saw edge will not be torn when the main saw blade is cut, thus obtaining good sawing quality. The diameter of the scribing saw blade is small, usually about 120mm, and is driven by a separate motor. The saw blade speed is generally above 9000r/min, and the cutting speed is generally 56~60 m/s. It is required that the scribing saw blade and the main saw blade are aligned in the same vertical plane. The diameter of the main saw blade & 8943; is generally 300~400mm, driven by the main motor through the V-belt. According to the different diameter of the main saw blade and the processing plate material, the main saw blade can use the tower wheel for speed change, the tower wheel speed change structure is simple, is a constant power output, more in line with the actual needs of wood processing. The power of the main motor is generally 4 ~ 9kw. In order to make the speed is simple, the special triangle belt is used to ensure that the required power transmission can be met with a single belt. The speed of the main saw blade is generally 3000 ~ 6000r/min, and the distance between the main saw blade and the scribing saw blade is generally about 100mm. Another main structural feature of the

push table saw is that the scribing saw blade and the main saw blade are fixed, and the moving table made of aluminum profile carrying the processed plate is pushed back and forth by hand to realize sawing processing. Due to the special structure of the guide rail of the mobile worktable, it is light and labor-saving when manually pushing the feed, and the processing accuracy is high. The bed of the

push table saw is mostly welded with steel plates with a thickness of 5~6mm, which is stable and beautiful. It can ensure that the early sawing processing type does not produce inclination and distortion. The fixed worktable is fixed on the top of the bed, and the Sichuan casting parts are required to be flat and not deformed. It is also provided with a longitudinal cutting guide plate and its adjustment mechanism.