The use of panel saw operating characteristics

push moving worktable is the key part of the panel saw, and it is also the main part that is different from the ordinary circular saw machine. The moving worktable is composed of brackets, lower guide rails, rollers, push table and other parts. Its remarkable characteristics are:(1) The operation is light and labor-saving, the pushing stroke is large, and the cutting and research is large;(2) It is equipped with a stable and light trailer, which runs smoothly;(3) The setting of the mobile worktable and the main saw blade can be adjusted by 45 degrees, which expands the scope of use of the saw. Some saw machines are also equipped with milling devices, which can perform groove and tongue-and-groove processing with a width of 30-50MM. [2]

Operating Characteristics of Panel Saws

Fine Panel Saws are subject to dynamic balance or static balance. Under normal circumstances, no foundation is required and can be added on a flat ground. During the processing operation, the workpiece is placed on the mobile worktable, and the mobile worktable is manually pushed to realize the feed movement of the workpiece. The operation is very convenient, flexible operation and use should always pay attention to safety, to prevent the occurrence of accidents. The main technical parameters of

panel saw The specifications of

panel saw have become a series. The main parameters are the maximum saw plus length, and the general range is 2000 ~ 5000ram. China's industry standard JB/T9950-1999 "Parameters of Woodworking Sawing Machine with Mobile Worktable" stipulates T3 specifications of 2000mm, 2500mm and 3150mm.